Heat shrink tape

High-performance heat shrink tape for composite tube and rod fabrication. Applies uniform compaction pressure during cure, producing smooth, dense, void-free surfaces on filament-wound and wrapped composite components.

Heat shrink tape for building/repairing tubular structures

Material: 100% Oriented Polypropylene (OPP)

Thickness: 30 and 35 microns

Width: 25mm and 50mm

Roll length: 1100 meters

 

Quality Specification — 30 µm

Representative test report values for 30 µm nominal thickness.

Thickness Tolerance

Property Specification Result Conclusion
Nominal thickness 30 µm 30 µm Pass
Limit deviation ±6% within tolerance Pass
Mean thickness deviation ±5% ±2.0% Pass

Visual Inspection

Characteristic Specification Result Conclusion
Creases, gels, ridges, bubbles Not permitted None Pass
Streaks Slight MD streaking permitted below 30 µm None Pass
Roll edge scratches Not permitted None Pass
Roll edge alignment ≤0.5 mm 0.1 mm Pass
Core condition No dents or nicks affecting use None Pass

Mechanical Properties

Property Specification Result Conclusion
Tensile strength, MD ≥130 MPa 185.7 MPa Pass
Nominal strain at break, MD ≤180% 128.0% Pass

MD = machine direction. Values are from a representative production batch; a mill test certificate can be supplied with each shipment on request.

If you need a quote, please complete the form below and submit.

    Contact Information

    Product Details


    CA Composites
    Ask us about our products
    ⚡ Responses are AI-assisted and may not always be accurate. Please verify important technical details.