Hand Lay-Up Epoxy

Hand lay-up is the most common and least expensive open-molding process of building composites.  It requires the least amount of equipment. Layers of fiber reinforcements such as carbon fiber cloth  are placed by hand on a mold and resin is applied with a brush or roller.

CA Composites provides epoxy resin best suited for hand-lay up process.

  • Suitable for wind turbine blades, marine and automobile body manufacture.
  • Can be used with carbon fiber, glass fiber, basalt and aramid fibers.
Based on tg and curing temperature, we have two categories of hand lay-up epoxy resin.
Category:

Room temperature Curing Hand lay up Epoxy Resin

Model: CALT-5089

  • Tg: 75-85 ℃
  • Viscosity at 25℃ : 800-2000 cps
  • Flexure Strength: 100-125 MPa
  • Curing condition: 24 hours at 25℃ (initial cure) + 6 hours at 70℃ or 4 hours at  50 ℃(initial cure) +  6 hours at 70℃ (post cure)
  • Suitable for building boats, kayaks, parts for automobiles, drone etc.

For more info, Here’s the TDS: CALT-5089 Hand lay up epoxy resin

 

Medium Tg Hand lay up Epoxy resin

Model: CAML-5115

  • Tg: 100-115 ℃
  • Viscosity at 25℃ : 200-300 cps
  • Flexure Strength: 100-130 MPa
  • Curing condition: 5 hours at 50℃(initial cure)+ 5 hours at 100 ℃
  • Suitable for making moulds

Options on Hardener

  •  Fast : 30-60 minutes Pot life
  •  Slow: 100-120 minutes Pot life

We can ship these products to any country by air or water.  We also supply vacuum bagging material

Shipping Note

Liquid products cannot be shipped by air under any circumstances. Two options are available:

  • Sea freight — worldwide. Minimum order 2,000 kg.
  • Road freight — countries reachable overland from China. Suitable for smaller orders, for example 200 kg.

Please contact us with your destination and quantity and we will confirm the available options.

If you need a quote, please complete the form below and submit.

    Contact Information

    Product Details


    CA Composites
    Ask us about our products
    ⚡ Responses are AI-assisted and may not always be accurate. Please verify important technical details.