- Carbon fiber prepregs are manufactured by the infusion of carbon fiber cloths with a controlled amount of epoxy resin.
- All our prepregs are protected with wax paper on one side and plastic film on the other.
- All our prepreg rolls are 1m / 1.27m wide; Length is 50/100 meters. 10m rolls are available for sample orders
- We have Carbon fiber prepregs in Unidirectional, Plain, and Twill weaves.
Advantages of using prepreg
- Easy to process
- Stable size, Easy to mould
- Resistant to temperature and ageing
- Little unravel during transportation
Scope of application
- Manufacturing Fishing rods, tennis rackets, skate boards
- Aerospace industry
- Automobiles, yachts, Ships
- Construction reinforcement
List of Woven Carbon Fiber Prepregs (Plain and Twill)
| dry weight | resin content | final weight | thickness |
| 3k 200 gsm | 40% | 330 gsm | 0.23mm |
| 6k 320 gsm | 40% | 535 gsm | 0.36mm |
| 12K 400 gsm | 45% | 725 gsm | 0.45mm |
| 12K 600 gsm | 40% | 980 gsm | 0.60mm |
List of Unidirectional Carbon Fiber Prepregs(UD)
| dry weight | resin content | final weight | thickness |
| 20 gsm | 50% | 40 gsm | 0.03mm |
| 30 gsm | 40% | 50 gsm | 0.05mm |
| 54 gsm | 38% | 78 gsm | 0.06mm |
| 75 gsm | 32% | 110 gsm | 0.075mm |
| 100 gsm | 35% | 155 gsm | 0.1mm |
| 150 gsm | 35% | 230 gsm | 0.15mm |
| 200 gsm | 35% | 300 gsm | 0.20mm |
| 300 gsm | 35% | 460 gsm | 0.35mm |
All these above UD prepregs can be produced with/without scrim.
For more information on the strength of these UD prepregs, please visit this link.
We also supply Carbon fiber prepregs of other weights than mentioned above. Resin Content can be varied based on clients' requirement.
Methods of Curing
Our Prepregs are extremely convenient to work with and can be processed in a variety of methods:
- Autoclave
- Out of Autoclave
- Heat-press moulding
- Heat-shrink wrapped
Ideal curing process for our prepregs
- Once you take out the prepreg from freezer, let it defrost overnight.
- For curing, first cure it at about 80C for about 30 minutes
- Then raise to 120C, for 120 minutes.. If 130 C, only 60 minutes. About 4 hours if at 100 C
- Wait untill the temperature lowers to 60 C , then remove mould
This is the process for our default/standard resin system, we also supply prepregs made using other epoxy resin systems with different Tg and curing temperatures.
Storage and Transportation
Our Prepregs can be stored at room temperature for about a month hence do not require freezer bags for transportation. But if stored in a freezer (at about -18°C) then our prepreg can last for more than 6 months.
We also supply Kevlar Prepreg and fiberglass prepreg
| List of Resin systems used in prepregs supplied by CA Composites | |||
| Resin
Name |
Glass Transition (Tg) | Curing Condition | Remarks |
| TNYPH-23 | 100-110 | 120 minutes at 90 C + 120 minutes at 100 C | standard resin/slightly lower curing temp |
| TNYPH-42 | 120-130 | 30 minutes at 80 C + 100-120 minutes at 120-125C | Standard tg/standard curing temp |
| JS-YPH170 | 175-180 | 30 minutes at 80 C + 90 minutes at 150 C | moderately high tg |
| TN-YPH170 | 170-190 | 30 minutes at 80 C + 45 minutes at 160 C | moderately high tg |
| JS-YPH200 | 195-205 | 30 minutes at 150 C + 120 minutes at 200 C (after cure) | highest Tg |
| TN-FR-Epoxy | 120-130 | 30 minutes at 80 C + 30 minutes at 150 C (or 90 minutes at 120 C) | Flame Retardant/ UL94 V-0 compliant |
| JS-FR-Epoxy | 120-130 | 30 minutes at 80 C + 90 minutes at 120 C | Flame Retardant/ UL94 V-0 compliant |
| JS-YPH150 | 140-150 | 5-10 minutes at 150 C | Superfast curing and moderately high tg |