Also Known as Bleeder, these breather cloths are responsible for absorbing the extra resin during vacuum infusion process.
CA Composites supplies the following two types of Breather cloth.
Type A
Type B
Fiber Content: 100% Polyester...
Perfect for removing your composite parts from the mould.
Available in various size
We suppy high temperature resistant flash breaker tapes used in vacuum bagging process.
These are availabe in variety of widths whereas length is fixed at 33 meters a roll.
Color
Green
Short term temperature resistance
220 C
Long term temperature...
Our Spiral tube is a half tubular coiled structure used to assist the flow of resin during vacuum infusion process. It is placed under the feed line. Our spiral tube is made from polypropylene plastic and yet able to bear up to 120 C. We have two different...
Peel ply, also known as Release fabric is a plain woven but porous nylon fabric with red/blue lines. Such peel ply can also be made from PET(Polyester)
When the laminate is cured and peel ply is peeled off, you'll get a smooth and harmful edges...
PTFE coated fiberglass with silicone adhesive is a pressure-sensitive tape designed to adhere to Mould surfaces providing semi-permanent release and a reconditioned surface. It can be used on all types of molds, press platens, caul sheets, or any surface...
We supply perforated and Non perforated release film.
Our release films are almost transparent, smooth and tidy with good tensile strength.
Width: 1 and 1.5 meter
Thickness: 0.03 and 0.05 mm
Temperature Resistance: 120 C and 160 C
Color:...
Designed for vacuum infusion process, our resin catch pot comes with or without vacuum meter.
It collects the excess resin from the process and helps avoid contamination.
Based on your requirement for content capacity, you can either choose our 2L...
Resin Infusion mesh (also know as Flow Media) is responsible for the even flow of resin during vacuum infusion process. It can also be used to increase the speed of resin flow in selected areas.
Our infusion mesh is really easy to flat out and suitable f...
Resin Infusion Valve
Material: Plastic
Weight: about 25 grams
Available diameters: 10mm
Tolerance on diameter: ±0.3mm
Color: black/white
Minimum order quantity: 50 units
This valve is used in controlling the flow of resin during infusion process. I...
Our vacuum bagging films have extremely good elongation and strength. Its auto release property is a huge advantage when direct contact with resin is needed. These vacuum bagging films have been successfully used in several big project in the wind en...
Vacuum Pump for vacuum bagging and vacuum degassing
Our vacuum bagging sealing tape offer 100% seal proofing and can be used for sealing Nylon films with Aluminum, Iron and plastic substrates.
These tapes (also known as Tacky tape) are resistant to high temperatures, diffusion and very convenient t...