TYPICAL PROPERTIES (BASED ON CATBME-800)
| COMPOSITION | Modified Epoxy |
| COLOUR | Brown |
| DENSITY (ISO 854) | 800 kg/m3 |
| HARDNESS (ISO 868) | 75-80Shore D |
| GLASS TRANSITION TEMPERATURE (ASTM E1356) | 130-140o C |
| HEAT DISTORTION TEMPERATURE (ISO 75B) | 125 oC |
| COEFFICIENT OF THERMAL EXPANSION (ISO 11359-2) | 30-40 10-6K-1 |
| COMPRESSIVE STRENGTH (ISO 178) | 50-60 Mpa |
| FLEXURAL STRENGTH (ISO 178) | 35-40 Mpa |
Standard Sheet sizes are as follows:
| 1500 x 500 x 50 mm |
| 1500 x 500 x 75 mm |
| 1500 x 500 x 100 mm |
| 750 x 500 x 50 mm |
| 750 x 500 x 75 mm |
| 750 x 500 x 100 mm |
Why Use Epoxy Tooling Board?
1. Our Epoxy tooling boards can bear 150 C and are ideal for high temp applications.
2. Our Epoxy tooling boards are highly rigid and can produce super accurate patterns and moulds.
3. Our Epoxy tooling boards are available in various thicknesses and up to 200mm.
Here’s the link to more technical data TDS-Epoxy tooling borad
